Model No.: HYJ-23
is a professional evaporated vacuum coating machine, evaporated vacuum coating machine, evaporated vacuum coating equipment, evaporated vacuum coator, evaporated vacuum metalizing machine, evaporated vacuum metalizing oven, vacuum plating equipment, vacuum plating oven manufacturer, factory, plant and supplier, we are always at your service.
Model 1800 Vertical double door high vacuum coating machine
Vacuum coating machine description
1. This equipment is mainly used for steamed after pretreatment of plastic products surface metallized or Color film, that is, plastic surface metallization and colored shaped. The evaporation is under high vacuum to aluminum (AL) or other suitable metal heating, make the metal vaporization, forming metal vapor molecules, scattering around the container, because the plating on the surface of the base temperature is low, the vapor molecules on the surface of the condensation in the base, the formation of membrane layer, can also be evaporated zinc sulfide produced on the surface of silicon and oxygen in color decorative pattern, such as the following, cosmetic shell, toys, light, reflective cup size specifications, etc.).
2. Application and advantages:
This equipment is my company development and production of multipurpose vacuum coating machine, the machine is available In plastics, ceramics and other non-metallic materials and metal surface treatment of base, make its surface metallization, in order to increase its value, USES the device of electroplating process is easy to operate, craft simple, the effect is good, and no environment pollution. The biggest advantages of this coating machine pumping speed is fast, because is equipped with a mechanical pump, roots pump 1200, H - 150 KT - 800 diffusion pump, pumping speed so fast, is worthy of popularization and practical coating equipment. The equipment is the total weight about 11 tons, voltage 380 v three-phase, single-phase 220 v, frequency 50 hz (Hertz), 60-80 kw power.
3, main technical performance indicators:
(1), the size of the vacuum chamber (double open the door).
Inner diameter is 1800 mm
Artifacts within the frame for the six axis, and the nine shaft, uniform distribution, six rotary shaft workpiece axis diameter of 590 mm, nine shaft is 440 mm, the workpiece frame length is 1850 mm.
(2), extraction time, from the atmosphere to work vacuum 5 x 10-2 pa is less than or equal In 5 minutes (empty furnace clean)
Ultimate vacuum: from atmospheric pressure to 3 x 10-3 pa (empty furnace clean).
4.This coating machine:
1, the diameter of 1800 mm * 2050 vacuum chamber within one table (according to customer needs and order).
2, H - 150 plunger pump two sets.
3, 1200 roots pump station (Shanghai).
4, KT - 800 diffusion pump two units, 800 pneumatic valve diameter two sets of 800 cold trap two pieces.
5, 2 x - 30 liters maintain pump station.
6, vacuum piping one whole set (including bellows 3 only).
7, with a touch screen and PLC control (import schneider, 10 inch panel (touch screen), electric control cabinet with vacuum JiYi station display, inverter one, main machine tools and appliances with suzhou suzhou Siemens; Can also according to customer requirements, set to automatic and manual, semiautomatic control.
8, vacuum interior design is easy to remove the underwear of one set of stainless steel, with 25 kw transformer one (380 v)
9, artifacts located in double open the door, inside six axis wheelbase 590 mm, wheelbase 440 mm, outside nine axis, workpiece frame length is 1850 mm.
Vacuum evaporation coating machine is mainly used in the surface of the plastic products, ceramics and other pre-treated by the vapor-deposited metal film (aluminum, chrome, stainless steel and other metals), colorful film and imitation gold film, thereby obtaining a bright, beautiful, inexpensive plastic and ceramic surfaces metalized products. Widely used in decoration decoration, lighting, furniture, toys, bottle caps, heel women's shoes, car mirrors, crafts, jewelry, shoes, watches, mobile phones, DVD, MP3, PDA case, cosmetic case and Christmas gifts industry. Processable materials include ABS, PS, PP, PC, PVC, nylon, metal, glass, ceramics, TPU materials. Plating effect: general plating glossy, matte (half-mute, all dumb), the electroplating process wrinkles, drawing, raindrops, colorful.
| Type ||ZF-1000||ZF-1200||ZF-1400||ZF-1600||ZF-1800|
|Vacuum chamber diameter|| D1000*H1200MM ||D1200*H15000MM||D1400*H1600MM||D1600*H1800MM||D1800*2000MM|
|Resistance evaporation power|
|Vacuum chamber material||SUS - 304 high quality stainless steel material cavity or high quality carbon steel|
|Vacuum chamber structure||Vertical single to open the door, vertical double open the door, the rear vacuum system|
|Ultimate vacuum||8.0 x 10-4 Pa, leakage rate of 1 h Pa 0.6 or less|
|Extraction rate||From the atmosphere to 6.7 x 3 pa 8 to 10-15 minutes (room temperature no-load clean)|
|The evaporation power|| 10KW ||15KW|| 20KW ||20KW||25KW|
|The whole machine total power|| 25KW ||40KW||60KW||65KW||80KW|
|Vacuum system||Diffusion pump, roots pump and mechanical pump + maintain pump (specific type can be configured according to customer's requirements)|
|Pressure test||Digital display fully automatic compound vacuum gauge|
|Air intake system||Optional flow controller, with automatic control, which can realize automatic conversion|
|Bogie rotation system||Variable frequency infinitely adjustable-speed|
| The cooling system ||Water circulating cooling system.The need to match or cryogenic cooling towers or industrial cold water machine system (customers)|
|The control mode||Manual or PLC and touch screen operation, which can realize the automatic, manual and semi-automatic control|
|Alarm and protect||Pressure alarm, pressure alarm, over-current protection, execute the corresponding protection measures and electric interlock function.|
|Other technical parameters||Acuity 0.2 MPa water pressure, water temperature 25 ℃ or less, air pressure, 0.5 to 0.8 MPa|
|note||Specific configuration size can be designed according to the customer's coating products.Another additive with magnetron sputtering target.Customizable Ф vacuum chamber size range 500-3000 mm, height 500-3000 - mm.|
Shenzhen Heng Yi Jia Technology Co., Ltd.
Shenzhen Heng Yi Jia Technology Co., Ltd. has focused on paint spraying equipment for over20 years in China. We started as a small operation, but now have become one of the leading painting line suppliers in the coating industry in China.
Today,Shenzhen Heng Yi Jia Technology Co., Ltd. has been one of the top producers of quality automatic spraying line and new technologies, such as: automatic paint spraying line, UV paint spraying line(uv lines), spray chrome line, mini auto painting line, spray chrome equipment and accessories of coating equipment of vacuum metallizing machine(metallizer), Automatic UV plating vacuum line, spray booth, coating chain, UV curing oven, automatic spray chrome equipment&line, spray powder coating line & equipment and so on.
Shenzhen Heng Yi Jia Technology Co., Ltd. is located in the China The beautiful coastal city-Shenzhen. As a global supplier in auo paint spraying line, UV paint spraying line, mini auto painting line, spray chrome line, spray chrome equipment and accessories of coating equipment. Heng Yi Coating Technology is to create added value for customers around the world.
Our products includes the following:
1, Automatic paint spraying line
2, UV paint spraying line
3, Mini automatic paint spraying machine
4,small automatic spray coating machine
5.UV spray coating line
6. automatic spray painting line
7.Industrial tunnel oven
9.UV curing machine
We supply coating products all over the globe to a wide range of companies worldwide, ranging from large multinational organizations to small individual companies.
Spray painting plant for Industry use are widely used in the following industry, such aspackage coating plant:
--- Glass packages coating for cosmetics, perfume, wine, caps, bottles and other parts
---Painting plant for product paint surface finishing
---Vacuum coating plant
Spray chrome equipment with formula which from our second production line, are widely used for cmetallzing oating, and vacuum coating machine etc.
We always feel that all success of our company is directly related to the quality of the products we offer. They meet the highest quality requirements as stipulated in ISO9001, ISO14000:14001 quality control system, CE certificate, etc.
We are capable of mixing and producing an paint spraying line, UV lines and offer some of the most advanced manufacturing capabilities available, including vacuum coating machine, mini paint spray machine and spray chrome machine etc.
We have customers from both domestic market and oversea market.Heng Yi Jia Technology Sales managers can speak fluent English for good communication. Our main sales market:
China : 50%
Our service for coating equipment.
Besides our existing molded spray painting line, auto paint spray line, uv paint line, mini paint spray line, spray chrome machine, also can produce other coating line according to the drawings from our customers. We control the product quality critically for every step during the manufacturing from custom coating equipment. We offer technical support that is second to none. installation at local.
- Company Name: Shenzhen Heng Yi Jia Technology Co., Ltd.
- Representative: Wu Juhua
- Product/Service: Powder coating machine , Automatic Spray painting coating Line , UV Coating machine Line , small automatic spray coating machine , tunnel oven , semi-automatic spray coating line
- Capital (Million US $): 50万
- Year Established: 2016
- Total Annual Sales Volume (Million US $): Below US$1 Million
- Export Percentage: 81% - 90%
- Total Annual Purchase Volume (Million US $): Below US$1 Million
- No. of Production Lines: 5
- No. of R&D Staff: 5 -10 People
- No. of QC Staff: 11 -20 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 3,000-5,000 square meters
- Factory Location: No.2 Street 5 Lao Keng Industrial Zone Keng Zi Shenzhen China
- Contact Person: Ms. Demi Wu
- Tel: +86-755-29492864
Premium Related Products